⎝⎛彩票注册⎞⎠

Shanghai Meitian Electromechanical Equipment Co., Ltd.
4006867868
Industry ⎝⎛彩票注册⎞⎠

Installation and use of voltage regulators

Time: 2019.10.24 Source: http: //qrfw813t.icu Author: Shanghai Mechanical and Electrical Equipment Co., United States
The voltage stabilizer can be applied to: computers, precision machine tools, computed tomography (CT), precision instruments, test equipment, elevators, industrial and mining enterprises, oil fields, railways, construction sites, schools, hospitals, post and telecommunications, hotels, scientific research and other departments Lighting, imported equipment, production lines and other places that require stable power supply voltage. It is also suitable for users at the end of low-voltage distribution networks with low or high power supply voltages and large fluctuations, and electrical equipment with large load fluctuations. It is particularly suitable for all voltage-stabilized electrical places that require high grid waveform requirements. The high-power compensating power regulator can be connected to firepower, hydraulic power, and small generators.
AC regulator manufacturers believe that everyone is no stranger to the regulator, because this device is very useful in our real life, the effect is very good, and the practicality is very high. However, for users who have not yet used the regulator, they really have no idea. To this end, Mitsuta Mechanical and Electrical Equipment made a summary and introduced the installation and use of the voltage regulator, including the following aspects.
First, pay attention to installing the voltage regulator in the correct way. The first-class AC voltage regulator manufacturers introduced that when using the voltage regulator, the connection between the two should be correct. To find the relevant output connection, but also with the Mains connection. At the same time, the regulator manufacturer also reminded to check the connection of the line to see if there is a short circuit or disconnection, and pay attention to wiring according to the requirements of the specification.

Second, pay attention to turning on the switches in the correct order. Reliable AC voltage regulator manufacturers introduce that the power switch of the voltage regulator should be turned on first, the work indicator and the delay indicator are on and there is no power output, and the power will be transmitted after a few seconds. Observe whether the indicator light indicates 220V normally. Manufacturers of AC voltage regulators emphasize that they should ensure that the voltage regulator operates normally, and then turn on the switch of the electrical appliances in such an environment.

Third, pay attention to avoid overload of the regulator
AC voltage regulator manufacturers emphasize that the voltage regulator should not be overloaded, especially when the voltage supplied by the ordinary government becomes low, we should try to reduce the load on the voltage regulator. At the same time, the regulator manufacturer also reminded that when using electrical appliances such as refrigerators and motor-operated equipment, because the consumption is relatively large, it is necessary to choose a regulator with sufficient capacity to prevent the fuse of the regulator from blowing or tripping and cannot jobs.

AC voltage regulator <br /> The above are some aspects that need to pay attention to when installing and using AC voltage regulator. I introduce it to you from the manufacturer of Miita voltage regulator. It's also important to note that the conductors connected to the regulator should have a sufficient cross-section to prevent heat generation and reduce voltage drops. AC voltage regulator manufacturers also introduced that voltage regulators with a capacity exceeding 2KVA are connected through terminals. Select a single copper wire and tighten the terminal screws as much as possible to prevent the connection from heating up.
+ BTKxOJAUN / yIR7E4fzj + sgSj7Kp4ZlaLWI5COfDZGi3Ri0ntLIadXp5nT8lPB8ICYvH1RyuITI = 七乐彩 欢乐拼三张 真人游戏平台注册 欢乐拼三张